Program (ED) for changing some Hidden functions, reading and deleting errors (DTC) from ECUs, changing immobilizer PIN codes, correction ODOmeter on same Dasboards.
Each writting to the block (except for work with DTC and ETACS Custom coding) costs 1 credit (request for keys).
Request packages can be purchased from THIS SITE only.

Before paying, we recommend DOWNLOADING the program, running it and registering an account into which you will make the payment.

EtacsDecoder only supports the machines listed below until the 2021 model year.

Supported cars:

Outlander XL/ES 2007+
Outlander III/PHEV 2013
Lancer X/EX 2007
ASX/RVR/Outlander Sport
Mirrage/Attrage >13MY
Delica D5
Pajero Sport >16MY
L200 >16MY
Eclipse Cross >17MY

Peugeot 4007, 4008
Citroen C-Crosser, AirCross
Nissan Livina >2019
Fiat Fullback 17MY

For the rest models, a MUT-bridge is available for the official MUT-III diagnostic program to work with any J2534 adapters.

Supported adapters:

Tactrix OpenPort2 (original, clones)
Chipsoft J2534
Actia XS Evol (Lexia)
Toyota Mini-VCI (original, clones. !!! for <13MY)
ELM327 ver. 1.4-1.5 (USB for <17MY, BT for <13MY) (bad choice)
Bosch – Ford – VCM II
Bosch KTS 570
Drew MongoosePro MFC
JCI-Alliance Probe
J2534-Mangoose (Mongoose JLR)
Allscanner VCX
VCX-Nano N52FM (driver VXDIAG J2534)
Scanmatik2 (with J2534 drivers)

Basic capabilities:

Reading, editing and writing of:

  • ETACS Variant coding
  • ETACS Custom coding
  • ETACS Extra coding (non-available in MUT)
  • ENGINE coding
  • SRS (Airbag) coding
  • SST coding
  • PHEV coding

Read and clear DTC (error codes)
Reading and resetting the CVT oil Degradation counter
Setting arbitrary value for Service Reminder
Disabling the seat belt alarm buzzer
Immobilizer PIN code change
RLS calibrating
ABS break fluid filling procedure

VIN code change of:

  • ETACS unit
  • ENGINE unit
  • SRS (Airbag) unit

ETACS full reset to factory state with clearing info:

  • VIN (original and current)
  • Variant coding
  • Option coding
  • Custom coding
  • VIN changing counter
  • Coding changing counter

ODOmeter correction on Dashboards with Nippon Seiki MB91F223 for J2534 (except for Mini-VCI)

Gives access to work with the official MUT-III SE soft with your adapter for diagnostic and service procedure. (See special tool MUTConfig)