ETACS Decoder forum
R/W error: 22 - conditions Not Correct Or Request Sequence Error - Printable Version

+- ETACS Decoder forum (https://etacsdecoder.com/forum)
+-- Forum: ETACS Decoder (https://etacsdecoder.com/forum/forumdisplay.php?fid=1)
+--- Forum: ETACS Decoder in English (https://etacsdecoder.com/forum/forumdisplay.php?fid=2)
+--- Thread: R/W error: 22 - conditions Not Correct Or Request Sequence Error (/showthread.php?tid=1309)



R/W error: 22 - conditions Not Correct Or Request Sequence Error - adhia - 19-04-2019

My car is Mitshubishi Xpander from Indonesia.

tried to do reprogram for auto lock door. but i got this msg. 

R/W error: 22 - conditions Not Correct Or Request Sequence Error

at the end, i lost 1 credit , but the writing is not successful. and nothing change. 

I would like to try again, but i am afraid to keep loosing credit without any result.

ps: attached is the log.

one thing i notice that the type at etacs menu is pajero (while my car is xpander). after changing to xpander, i lost all the menu and options.

please help. 
thank you


RE: R/W error: 22 - conditions Not Correct Or Request Sequence Error - Earl_Vadim - 19-04-2019

You havn't lost credit.. You spend it to
"4/19/2019 6:17:24 PM - Save to CUF-file C:\Users\adhia\Documents\8637B281_MK2NCWPARKJ002063_201904191817.cuf"


RE: R/W error: 22 - conditions Not Correct Or Request Sequence Error - marlon1213 - 30-04-2019

sir what is the solution for the said error mentioned above.. forR/W error: 22


RE: R/W error: 22 - conditions Not Correct Or Request Sequence Error - Earl_Vadim - 30-04-2019

try write coding to block without changes for test.